|
 |
• Impact resistant tempered
hardboard substrate
• Increased thermal value with EPS
or ISO foam core
• Attractive alternative or
complement to glass
• Available in Kynar 500®, metallics
& anodized finishes
(as well as porcelain enamel steel)
• Little or no maintenance is
required
[Literature]
[Request
Samples] |
|
|
 |
GlazeGuard® 1000 is a composite panel for use as a
glazing infill made
by laminating
two prefinished aluminum
skins to substrates of tempered hardboard.
These stabilizers
surround a expanded polystyrene (EPS) or
isocyanurate (ISO) foam core. These panels
are designed for use as a replacement or complement
to glass in windows, storefront,
modesty screens, railing inserts, etc.
Similar in thickness to GlazeGuard® 1000 WR (both
are 1"), these panels offer more
impact resistance than the lightweight composition
offered by the plastic core. |
|
|
|
GlazeGuard® panels are installed in aluminum
glazing/storefront channels (by others)
typically on setting blocks and sealed using rubber
gaskets. Since they are encapsulated
on all four sides by this channel, no mechanical
fasteners, adhesives, or moldings are
used in the installation of these panels.
[View
Mock Up Of Installation] (shown
above) |
|
|
 |
|
|
|
Component |
Standard
(in) |
Metric
(mm) |
|
• Prefinished
Textured Aluminum Skins
(or) Prefinished Smooth Aluminum Skins
(or) Porcelain Enamel Steel Skins
• Tempered Hardboard Stabilizers
• Expanded Polystyrene Foam (EPS) Core
(or) Polyisocyanurate Foam (ISO) Core |
.010"
.024"
28ga
1/8"
11/16"
11/16" |
.254mm
.609mm
.390mm
3.18mm
17.5mm
17.5mm |
|
|
|
|
[View
Panel] |
 |
|
|
|
Property |
Standard
(in) |
Metric
(mm) |
|
• Panel
Weight
• Nominal Thickness |
2.08 lbs/ft²
1" |
10.2 kg/m²
25mm |
|
|
|
 |
|
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12' |
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144" |
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm) |
|
|
|
 |
|
|
|
|
